Hitachi C 10FSB Technical Data And Service Manual page 9

(8) Miter cutting
* These numeric values are for the models destined for the U.S.A. and Canada.
Refer to "5. SPECIFICATIONS" as the capacities are different depending on the destinations.
Maker
Model
Max.
cutting
dimension
Right and left 45˚
Height x Width
(H x W)
Right 57˚ (Hitachi)
Right 52˚ (C)
Height x Width
(H x W)
* C cannot perform miter cutting more than 52˚.
Wide workpieces as wide as shown in Table 5 can be cut by
swiveling the turn table (right and left).
The maximum cutting dimensions in [
obtained by adjusting the lower limit position of the saw blade
indicated in Fig. 5-2, also with an auxiliary board.
(9) Right and left bevel cutting
* These numeric values are for the models destined for the U.S.A. and Canada.
Refer to "5. SPECIFICATIONS" as the capacities are different depending on the
destinations.
Maximum cutting dimension
Maker
Model
Max.
cutting
dimension
Left 45˚
Height x Width
(H x W)
Right 45˚
Height x Width
(H x W)
Workpieces as wide as shown in Table 6 can be bevel-cut by tilting the saw blade (right and left).
Right 45˚
HITACHI
C 10FSH
C 10FSB
85 x 218 (3-11/32" x 8-19/32")
90 x 190 (3-9/16" x 5-25/32")
with aux. board width 15 (19/32")
85 x 165 (3-11/32" x 6-1/2")
90 x 147 (3-9/16" x 5-25/32")
with aux. board width 10 (13/32")
] in Table 5 are those
HITACHI
C 10FSH
C 10FSB
55 x 305 (2-3/16" x 12")
60 x 280 (2-3/8" x 11")
with aux. board width 15 (19/32")
30 x 305 (1-3/16" x 12")
35 x 280 (1-3/8" x 11")
with aux. board width 15 (19/32")
Left 45˚
Width (W)
Workpiece
Fig. 8
Table 5
HITACHI
C 10FS
85 x 220 (3-11/32" x 8-15/32")
90 x 215 (3-9/16" x 8-15/32")
85 x 180 (3-11/32" x 7-3/32")
90 x 165 (3-9/16" x 6-1/2")
with aux. board width 10 (19/32")
Workpiece
Table 6
HITACHI
C 10FS
55 x 305 (2-3/16" x 12")
60 x 295 (2-3/8" x 11-19/32")
30 x 305 (1-3/16" x 12")
35 x 295 (1-3/8" x 11-19/32")
Height (H)
--- 5 ---
Unit: mm (inch)
C
91 x 216
(3-19/32" x 8-1/2")
91 x 185
(3-19/32" x 7-9/32")
Left 45˚
Right 57˚ (Hitachi)
Right 52˚ (C)
Fig. 7
Unit: mm (inch)
C
50 x 305
(1-31/32" x 12")
31 x 305
(1-7/32" x 12")
Example of bevel
cutting application
Fig. 9
Width (W)
Height (H)