Hitachi C 10FSB Technical Data And Service Manual page 56

2 Actual wiring diagram
C 10FSH USA/CAN
Secure the controller pickup portion
near the rib of handle (L)
(armature fan side).
Insert each internal wire in
the groove of handle (L).
White
Black
Red
Trigger
switch
Cord (A)
Internal wire (black)
Connector (B) (red)
Internal wire (black)
Switch
Handle (R)
Handle (L)
Connector (B)
(red)
*Bind the internal wires with the cable
Fig. 71-1
--- 52 ---
Cord (black)
Internal wire (black)
Cord (A) ass'y (black)
Stator ass'y (yellow)
Cord (A) ass'y (white)
Stator ass'y (blue)
Cord (A) ass'y (red)
Stator ass'y (gray)
Cord (white)
Connector (B) (white)
Cord
Connector
Switching power
supply
tie (Code No. 975144) to prevent the
internal wires of the Switching Power
Supply [144] and the Laser Marker
[99] from being pinched by the ribs
of the handle.