Hitachi C 10FSB Technical Data And Service Manual page 49

Disassembly
Item
No. spots
7
Laser marker
Disassembly procedure
1. Remove the three Tapping Screws (W/Flange) D4 x 20 (Black)
[154] and two Machine Screws (W/Washers) M5 x 25 (Black)
[155] to remove Handle (R) [153].
2. Remove the one Tapping Screw (W/Flange) D4 x 16 [143] and
disconnect the connectors at both sides of the Switching Power
Supply [144] to remove the Switching Power Supply [144].
3. Push out the Cord Bush [147] from the inside of Handle (L) [148].
Open the Cord Bush [147] to remove it from the cord of the Laser
Marker [99].
4. Remove the Machine Screw M4 x 8 [73] to remove the Cover [74]
from behind hinge (A) sss'y.
Fig. 65
--- 45 ---
Necessary tools
Phillips
screwdriver
Phillips
screwdriver