Heatscope ZERO Original Installation And Instruction Manual page 12

EN
1. Usage & Measurements
Thank you for choosing to purchase the electric radiant heater HEATSCOPE® ZERO.
You have purchased one of the most advanced heating systems for indoor and covered outdoor
areas. The infrared radiant heater without red light is characterized by a focused distribution of
heat, which transports the heat to where it is needed.
The radiant heater allows the radiant heat to be transported up to a distance of about 2.5 meters.
The unit can be aligned in a targeted way to a particular area using various brackets.
1. Please read the instructions carefully prior to installation. The operating instructions should be
regarded as part of the product. You should only install the unit when you have read and under-
stood the operating instructions. If in doubt, contact the vendor or manufacturer.
2. Keep the instructions for future reference. Make sure to pass on the operating instructions to
any subsequent owner of the unit and ensure that any supplements received are included with the
instructions.
3. Before starting the installation, you must ensure that the operating voltage corresponds to that
stated on the nameplate of the HEATSCOPE® ZERO or accessories.
4. These operating instructions are intended solely for the series products mentioned above. De-
viations in relation to technical data, installation and dimensions are possible in the case of special
versions.
B
C
D
Type/Size
MHS­ZE600
593 mm/245,3 inch
MHS­ZE1800 993 mm/402,76 inch 108 mm/4,26 inch
MHS­ZE2400
1493 mm/599,61 inch 108 mm/4,26 inch
MHS­ZE3200
1993 mm/796,46 inch 108 mm/4,26 inch
A B
108 mm/4,26 inch
A
E
C
169 mm/6,66 inch 61,5 mm/2,42 inch
169 mm/6,66 inch 61,5 mm/2,42 inch
169 mm/6,66 inch 61,5 mm/2,42 inch
169 mm/6,66 inch 61,5 mm/2,42 inch
All dimensions are approximate values in mm and inch.
D E
200 mm/7,88 inch
200 mm/7,88 inch
200 mm/7,88 inch
200 mm/7,88 inch