Configuring Night Mode Settings - Lorex LNC116 Instruction Manual

8.4.6 CONFIGURING NIGHT MODE SETTINGS

Configure when the camera uses day or night mode. When day mode is on, the camera
sees in color. When night mode is on, the camera sees in black and white, and the
Infrared LED turns on to enable night vision.
To configure Day/Night mode:
1. In Camera List, tap
2. Tap Video Settings. Then tap Night Mode Control.
3. Select one of the following:
• Auto: Camera will automatically switch between day mode or night mode, based on
the amount of light in the room.
• Schedule: Camera will switch between day mode and night mode at scheduled times
each day. If using this option, tap under Schedule time of night mode, use the sliders
to set the Start time (when night mode begins each day) and End time (when night
mode ends each day), then tap OK.
next to the camera you would like to edit.
Select Night Mode control option
Select Schedule to
schedule day/night mode
switch
Tap to configure day/
night mode schedule.
Android App
137