Connecting To Your Camera On A Mac - Lorex LNC116 Instruction Manual

Getting Started
5. Under Password, enter the camera password. If this is the first time connecting to
the camera, the password is lorex. Click OK.
6. Double-click the camera or drag the camera to a display screen to connect to the
camera.
7. If you have connected to this camera before, L-View connects to the camera. If this is
the first time connecting to the camera, L-View will prompt you to create your own
password for the camera. Click OK.
8. Under New Password, enter a password that will be used for the camera. Under
Confirm Password, enter the password again. Click OK.
9. Double-click the camera again under Camera List to connect. For detailed
instructions on using L-View, see "L-View 104 for PC" on page 28.

2.2.2 CONNECTING TO YOUR CAMERA ON A MAC

NOTE: For Mac system requirements, see "System Requirements" on page 54.
1. Install the L-View software from the CD or download it from
www.lorextechnology.com.
8
Enter a camera name
Enter the camera ID
Enter the camera Password
(default: lorex)
Click OK
Enter a new password
Confirm new password
Click OK