Editing Camera Mobile Streaming Settings - Lorex LNC116 Instruction Manual

iPhone App
3. Under Motion, select ON to enable Push Alarm Notifications when motion is detected
using video motion detection or OFF to disable.
4. Under PIR, select ON to enable Push Alarm Notifications when motion is detected
using the PIR motion sensor or OFF to disable.
5. Under Sound, select ON to enable Push Alarm Notifications when sound is detected
by the camera or OFF to disable. Under Sound Sensitivity, select a sensitivity for
Sound Push Alarm Notifications between 1 (lowest) and 10 (highest).
6. Tap Update to save your settings

6.4.4 EDITING CAMERA MOBILE STREAMING SETTINGS

Configure the camera image quality settings for streaming to mobile devices (i.e. smart
phones and tablets). Please note that less bandwidth is generally available over mobile
networks than over WiFi or Ethernet.
To edit mobile streaming settings:
1. In Camera List, tap
2. Tap Stream Settings.
3. Under Bandwidth, select the bandwidth for your mobile connection. If you are mainly
connecting using WiFi, you may set this setting higher.
90
next to the camera.
Select Mobile Bandwidth
Enable/disable auto resolution and frame
rate adjustement
Select Resolution
Select Frame rate
Enable/disable audio streaming