Table of Contents
Advertisement
Configuring Camera Settings using a Web Browser
2. Click Save & Apply. Restart the camera by disconnecting and reconnecting the power
adapter or pressing the Reboot button (see "Reboot" on page 154).
NOTE: Your computer must be on the same network as the camera to use Web
Configure. You may change camera settings over the Internet using the iPhone, iPad, or
Android apps.
9.5.2 LED CONTROL
Configure the behavior of the camera status LED's. This is useful if you want the camera
to be harder to spot at night.
To configure the LED's:
1. Select one of the following:
• Normal LED display: LED's will function as normal. For details on LED functions,
see "Camera Overview" on page 1.
• Turn off LED display always: LED's are turned off at all times.
• Turn off LED display after network connected: LED's turn on when the camera is
powered on and turn off once a network connection is made.
2. Click Save & Apply to apply settings to the camera.
170
Advertisement
Table of Contents
