Table of Contents
Advertisement
To configure LED's and motion detection sensitivity:
1. In Camera List, tap
2.Tap Video Settings. Then tap Control.
2. Under Status LED, select one of the following:
• Normal: LED's will function as normal. For details on LED functions, see "Camera
Overview" on page 1.
• Always turn off: LED's are turned off at all times.
• Turn off after network connected: LED's turn on when the camera is powered on
and turn off once a network connection is made.
3. Tap Control to return to the Control menu.
4. Under Motion Sensitivity, select the motion detection sensitivity between 1 (High)
and 10 (Low). If Motion Detection Sensitivity is set to 1, motion detection will be
triggered if a moving object is larger than 1% of the video area. If it is set to 10, a
moving object must be larger than 10% of the video area to trigger motion detection.
Tap Control to return to the Control menu.
NOTE: This setting does not affect the PIR motion detector.
5. Tap Video Settings when finished making changes, then tap Update to save your
settings.
6.4.7 CONFIGURING NIGHT MODE SETTINGS
Configure when the camera uses day or night mode. When day mode is on, the camera
sees in color. When night mode is on, the camera sees in black and white, and the
Infrared LED turns on to enable night vision.
To configure Day/Night mode:
1. In Camera List, tap
next to the camera.
Select LED behavior
Select video motion detection sensitivity
next to the camera you would like to edit.
iPhone App
93
Advertisement
Table of Contents
