Getting Started
4. Under Name, enter a name for your camera. This can be anything of your choice.
5. Under ID, press the QR code button (
back of the camera using the camera on the iPad. The CamID will automatically be
entered.
• OR: Manually enter the CamID printed on the camera.
NOTE: QR code setup is not compatible with 1st generation iPads. If you have a 1st
generation iPad, manually enter the CamID printed on the camera into ID.
16
) and line up the QR code printed on the
Line up the QR code to the
middle using the iPad camera
Enter a name for your
camera of your choice
Press to scan the QR
code printed on the back
of the camera, OR
manually enter the
CamID printed on the
camera