Lorex LNC116 Instruction Manual page 67

Wireless network camera
Hide thumbs Also See for LNC116:
Table of Contents

Advertisement

3. Under Place, select Outdoor video if the area with the camera is brightly lit. Select
Indoor Video if you notice strip lines in the image or if the picture is too dark on the
Outdoor video setting. Select Indoor video + Sunlight if the picture is too bright on
the Indoor Video setting.
• If you select Indoor Video or Indoor Video + Sunlight, select 60Hz or 50Hz to adjust
the camera for the frequency of your indoor lighting.
4. Under Video Flip, select Video Flip to flip the camera image vertically and
horizontally or select Normal for normal orientation.
5. Under Brightness, select the brightness of the image between 10 (highest) and
1 (lowest).
6. Under Low Light Sensitivity, set the camera's sensitivity in low light environments
between Very High (highest), High, and Normal (lowest).
7. Check Enable time display on video to turn on video time stamps or un-check it to
disable video time stamps.
8. Under Microphone, select Enabled to enable the built-in microphone on the camera
or select Disabled to disable the built-in microphone on the camera.
9. Click Update to save changes. Enter the camera admin username (default: admin)
and password (default: left blank) and click OK. The camera will disconnect. Wait
about 15 seconds and then double-click the camera in Camera List or Auto Search to
reconnect to the camera.
L-View 116 for PC
51

Advertisement

Table of Contents
loading

Table of Contents