To Add Or Change A User; To Delete A User - ADEMCO VISTA-20SE User Manual

To Add a User or
Important: Temporary users of the system (e.g., babysitters, cleaning staff) should not be shown how to
Change a User's
use any system function they do not need to know, such as bypassing protection zones for example.
Code
Sequential key depressions for all steps in a procedure must be made within 2
seconds of one another, or else the entire entry is aborted and must be repeated from
its beginning (e.g., perform steps 1, 2, and 3 below with no delay between steps).
Changing the Master
Code
1.
Follow the procedure
(Master Code)
for changing a user's
code, but enter user
2.
#02; enter the new
(User Number)
code a second time to
confirm accuracy.
WAIT for keypad beep
3.
before continuing!
(User's Code)

To Delete a User

1.
(Master Code)
2.
3.
SECURITY CODES
CODE
+ 8 ENTER MASTER CODE THEN PRESS CODE KEY
Example: 7 2 9 6 then
ENTER USER NUMBER
Enter the 2-digit User Number (03-16) for the user you
are adding or changing.
ENTER USER'S CODE
Enter the new 4-digit security code for that user.
CODE
+ 8 ENTER MASTER CODE THEN PRESS CODE KEY
Example: 7 2 9 6 then
ENTER USER NUMBER
Enter the 2-digit User Number (03-16) for the user
(User Number)
whose code you are deleting.
----------- STOP
Wait (about 3 seconds) until the keypad beeps once
before pressing any other key. The code is
automatically deleted.
– 28 –
press the CODE key.
press the CODE key.