Description - Hilti TE 1000-AVR Operating Instructions Manual

Obligation signs
Wear eye Wear a hard
en
protection hat
Wear
breathing
protection
Symbols
Read the Return waste
operating material for
instructions recycling.
before use
Volts Amps
Double Lock symbol
insulated

2. Description

2.1 Use of the product as directed
The power tool is an electrically-powered breaker with electropneumatic hammering mechanism designed for
heavy chiseling work.
The power tool is designed for breaking / removing and demolishing concrete, masonry, stone or asphalt.
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
Nationally applicable industrial safety regulations must be observed.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The
power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or
when used not as directed.
2
Location of identification data on the power tool
The type designation can be found on the type iden-
tification plate and the serial number on the side of
the casing. Make a note of this data in your operating
instructions and always refer to it when making an
Wear ear Wear
enquiry to your Hilti representative or service depart-
protection protective
ment.
gloves
Type:
Serial no.:
Chiseling Chisel position
adjustment
Alternating Hertz
current
Equipped with
theft
protection
system