Asko W6OO-SERIES Service Manual page 62

CUSTOMIZING THE PRESET PROGRAMS ON W640 AND W660
CHANGING THE LANGUAGE ON THE CHANGING THE LANGUAGE ON THE CHANGING THE LANGUAGE ON THE CHANGING THE LANGUAGE ON THE CHANGING THE LANGUAGE ON THE
LED WINDOW LED WINDOW
LED WINDOW LED WINDOW LED WINDOW
There are eleven languages available for the LED
window:
! English
! French
! Spanish
! Portuguese
! Italian
! German
To change the language, follow the steps below:
1. Turn the machine off then on again.
2. Press Enter five times in succession then press
P1 five times. (This must be done within 15
seconds.)
3. When the Language menu displays, press an
Arrow button to advance through the menu to
the desired language.
4. Once the correct language displays, press
ENTER to program the LED window to
display the language you selected.
CHANGING THE TEMPERA CHANGING THE TEMPERA CHANGING THE TEMPERATURE READOUT
CHANGING THE TEMPERA CHANGING THE TEMPERA
FROM CELSIUS TO FAHRENHEIT FROM CELSIUS TO FAHRENHEIT
FROM CELSIUS TO FAHRENHEIT FROM CELSIUS TO FAHRENHEIT FROM CELSIUS TO FAHRENHEIT
You can change the temperature readout on the LED
window from Fahrenheit to Celsius and vice versa.
To do this follow the steps below:
1. Turn the machine off then on again.
2. Press ENTER five times in succession then press
P2 five times. (This must be done within 15
seconds.)
3. When the Temperature menu displays, press an
Arrow button to toggle between Fahrenheit and
Celsius.
4. When your preference displays, press ENTER
to program the LED window to display the
temperature reading you selected.
62
! Swedish
! Danish
! Norwegian
! Netherlands
! Finnish
TURE READOUT TURE READOUT TURE READOUT
TURE READOUT
CHILD- CHILD- CHILD- SAFE ST CHILD- CHILD- SAFE ST SAFE ST SAFE ST ART (W640/W660) SAFE ST ART (W640/W660) ART (W640/W660) ART (W640/W660) ART (W640/W660)
As a safety measure, you can program the W640
and W660 not to start unless the Start button is
held down for three seconds. To do this, follow the
steps below:
1. Turn the machine off then on.
2. Press Enter five times, then press P3 five times.
(This must be done within 15 seconds.)
3. "Delay Start" displays with "0" flashing in the
lower right corner. Press the Right Arrow
button to toggle the display to "3."
Child-Safe Menu Button Child-Safe Menu Button Child-Safe Menu Button Child-Safe Menu Button Child-Safe Menu Button
Please note that when you set the child-safe Start
button, the Menu button is automatically
programmed to delay for three seconds before it
becomes active. This prevents a child from
accidentally changing the program settings.
When you want to change a program, press the
Menu button for three seconds to activate the
menus. The Menu button will work normally
(without the 3-second delay) until you have
completed your changes. If it is not pressed for two
minutes, it will automatically revert back to the
child-safe mode.