Asko W6OO-SERIES Service Manual page 36

GLASS DOOR CATCH AND FRONT COVER PLATE
CHANGING THE DOOR CA CHANGING THE DOOR CAT T T T T CH CHANGING THE DOOR CA
CHANGING THE DOOR CA CHANGING THE DOOR CA
1. Open the glass door (see page 8).
2. Remove the two screws securing the door and
take it off.
3. Remove the four screws around the glass.
4. To take off the frame, inserting a screwdriver
into the opening at the side and twist it.
5. Pull the catch straight out.
6. Push in the new catch.
7. Install the frame, starting at the rear edge, and
press it in.
8. Install the glass door.
Screws
P/N 8901969
36
CH CH
CH CH
Screws
P/N 8901969
Door Catch
P/N 8061798
REMOVING THE FRONT COVER PLA REMOVING THE FRONT COVER PLATE TE TE TE TE REMOVING THE FRONT COVER PLA
REMOVING THE FRONT COVER PLA REMOVING THE FRONT COVER PLA
1. Open the glass door (see page 8).
2. Remove the glass door (see page 35).
3. Unhook the four springs and the door catch
screw.
4. Lift off the cover plate.
Springs
P/N 8061879-2
REPLACING THE COVER PLA REPLACING THE COVER PLA REPLACING THE COVER PLATE TE TE TE TE REPLACING THE COVER PLA REPLACING THE COVER PLA
5. Align the plate and secure it with the screw at
the door catch.
6. Hook on the four springs.
7. Replace the glass door.