Asko W6OO-SERIES Service Manual page 59

UNDERSTANDING THE LED WINDOW UNDERST UNDERST ANDING THE LED WINDOW ANDING THE LED WINDOW ANDING THE LED WINDOW
UNDERST UNDERST ANDING THE LED WINDOW
The LED window is easy to read and understand. It displays the wash program selection along with the wash
temperature, spin speed, and program run time. The illustration below explains each item on the LED
window.
Program
When you press the
Power button, the display
toggles between the
program numbers and
the wash program
names, (e.g., Normal,
Super quick, etc.)
Preset Programs
Displays the program
that is selected/running.
TEMPORARY PROGRAM CHANGES TEMPORARY PROGRAM CHANGES TEMPORARY PROGRAM CHANGES TEMPORARY PROGRAM CHANGES TEMPORARY PROGRAM CHANGES
You can make temporary changes to the wash
temperature and/or spin speed on the preset
programs. Simply press the button for the preset
program you want to use then follow the
instructions below. The settings will revert to
normal at the end of the program.
Temperature – Press
temperature displays in the LED window. If you
also want to change the spin speed, read the
following paragraph, otherwise, press Start.
Spin Speed – Press
displays in the LED window then press Start.
Door Open
Displays when you press
the Door Open button.
P 1 P 1 P 1 P 1 Normal wash
P 2 P 2 P 2 P 2
Normal wash
P 3 P 3 P 3 P 3 Super quick wash
P 4 P 4 P 4 P 4 Wool/hand wash
P 1 P 1 P 1 P 1 P 2 P 2 P 2 P 2 P 3 P 3 P 3 P 3 P 4 P 4 P 4 P 4
Start
Indicates that you
pressed Start and
the program is
running.
until the desired
until the desired spin speed
W640 AND W660 CONTROL PANEL
Temperature
Wash temperature for the
selected program.
rpm
1400 1400 1400 1400
Start Stop 105 105 105 105 43 43 43 43
Stop
Indicates that the
program has ended or
that you pressed Stop.
CUSTOMIZING THE PROGRAMS CUSTOMIZING THE PROGRAMS CUSTOMIZING THE PROGRAMS CUSTOMIZING THE PROGRAMS CUSTOMIZING THE PROGRAMS
Below are the basic instructions for changing a preset
wash program. The following page explains the
menus and options and how to navigate through
them.
1. Press the button for the preset program (P1–
P4) you want to change. The program you select
will display in the lower left corner of the LED
window.
2. Press MENU to display different program and
option settings.
3. Press the Arrows to move forward or backward
through the menu settings.
4. Press ENTER to choose your selection.
RESTORING A PRESET PROGRAM RESTORING A PRESET PROGRAM
RESTORING A PRESET PROGRAM RESTORING A PRESET PROGRAM RESTORING A PRESET PROGRAM
To restore a preset program to its original settings,
simply press the button for the preset program you
want to restore and hold it down while you press
ENTER. The program will revert to its original
settings.
rpm
Spin speed for the selected
program.
Program Time
When you start a program, the
total time the program runs is
displayed. As the program
progresses, the time
remaining displays. The
program time toggles between
the hours (e.g., 1h ) and the
minutes (e.g., 22 ). ( Note: The
program time displayed is the
time it took the last time it that
program was run.)
59