Asko W6OO-SERIES Service Manual page 6

INSTALLATION
S T S T S T S T S TACKED INST ACKED INST ACKED INST ACKED INSTALLA ACKED INST ALLA ALLA ALLATION ALLA
ASKO dryers can be mounted on top of any
matching ASKO washer. Mounts are supplied with
the machine.
Two metal brackets for
securing the dryer to
the washer
To install the dryer on top of the washer, follow the
steps below:
1. Remove the two outside screws (20 torx) from
the back of the washer and use them to secure
the metal brackets, as illustrated.
IMPORTANT
Don't forget the lock washers.
Washer
back
2. To ensure the dryer is correctly positioned on
top of the washer, align the plastic cups with
the front top edge of the washer.
To position the plastic cups, break off the left
tab (A) on the cup to be placed on the right
side of the washer and break off the right tab
(B) on the cup to be placed on the left side of
the washer.
3. Remove the protective
paper from the self-
adhesive surface beneath
the cups. Being careful
not to press the adhesive
surface against the top of
the washing machine, use
6
TION TION TION TION
Two plastic cups to
secure the dryer legs.
Metal brackets
Plastic cups
the tabs to position the cups (as illustrated) then
press them firmly into place.
4. Once the cups are in place, break off the
remaining plastic tabs on the outside edge and
front of the cup.
5. Lift the dryer into
position. Raising the
front edge, push the
dryer backwards until it
engages with the
brackets on the back of
the washer.
6. Carefully lower the
front of the dryer,
making sure the feet
fit into the plastic
cups.
S t a c k e d I n s t a l l a t i o n S t a c k e d I n s t a l l a t i o n S t a c k e d I n s t a l l a t i o n S t a c k e d I n s t a l l a t i o n S t a c k e d I n s t a l l a t i o n
Tumble dryer
Washer
WARNING! WARNING!
WARNING! WARNING! WARNING!
Never stack a washer on top of a dryer!
Total height 67".
Adjustable to 69".