Arris Touchstone TM602 User Manual page 15

Getting
Safety Started
Battery
Installation Installation
Basic Backup Battery Installation
Touchstone TM602 Telephony Modem User's Guide
USB Ethernet
Drivers Configuration
1 Pull back the battery door latch and remove the battery door. Set the door
aside.
2 Align the guides on the battery with the slots on the Telephony Modem as
shown below, and slide the battery into the bay.
3 Push the battery pack into the bay until it seats into place. Push on the cen-
ter of the battery to avoid inserting the battery at an angle.
Usage Troubleshooting
Battery Slot
Battery Guide
Glossary
15