Configure Your Library Using The Web User Interface - IBM System Storage TS3100 Installation Quick Reference Manual

Tape library
Hide thumbs Also See for System Storage TS3100:
Table of Contents

Advertisement

c. Press the ENTER button to highlight the digit(s) in your library's Gateway address.
d. After entering the final digits in your Gateway address, press the DOWN button and select one of
the following:
v Save - to save your network settings.
v Cancel - to cancel all of your entries and leave the settings as they were.
7. Press the ENTER button to return to the Configure menu.
8. Press the CANCEL button to return to the Main menu.
9. Press the CANCEL button to return to the home screen.

Configure Your Library using the Web User Interface

To configure your library using the Web User Interface, complete the following procedures:
1. "Choosing the Number of Logical Libraries for Your 4U Library"
2. "Choosing Library Settings" on page 1-15
3. "Choosing Drive(s) Interface Identification/Settings" on page 1-16
4. "Configure Library: Network" on page 1-17
5. "Entering User Access Information using the Web User Interface" on page 1-18
6. "Entering Date and Time using the Web User Interface" on page 1-18
7. "Entering Control Path Failover License Activation Key" on page 1-19
8. "Configuring Logs and Traces using the Web User Interface" on page 1-19
9. "Entering Event Notification Information using the Web User Interface" on page 1-20
10. "Saving Library Configuration using the Web User Interface" on page 1-21
Logging on to the Web User Interface
To complete the configuration of your library using the Web User Interface, follow the steps below. If you
have a 2U library, proceed to the section, "Choosing Library Settings" on page 1-15.
1. On your host computer, open Internet Explorer.
2. In the browser address field, enter your library's IP Address.
3. When the login screen appears, enter the following:
v Username: admin
v Password: secure
Figure 1-15. Log in screen on the Web User Interface
Choosing the Number of Logical Libraries for Your 4U Library
If you have a 2U library or do not wish to partition your 4U library, proceed to the next section, "Choosing
Library Settings" on page 1-15.
1-14
TS3100 and TS3200 (3573) Installation Quick Reference

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ts3200tape librarySystem storage ts3200

Table of Contents