Removing And Storing The Shipping Lock - IBM System Storage TS3100 Installation Quick Reference Manual

1
Figure 1-1. Installing foot pads on the bottom of the library chassis
4. Carefully return the library to an upright position.
Important: Do not stack objects on top of the library.

Removing and Storing the Shipping Lock

Important: The shipping lock, which prevents the library accessor from moving during shipment, must be
removed before the library is powered ON.
The shipping lock is held in place with a label and is located in the top center of the library. After the
shipping lock is removed, it should be stored on the right side of the back panel of the library for future
use.
To remove and store the shipping lock:
2 1
1. Remove the blue label ( ) that is securing the lock ( ) to the top of the library, then remove the
lock (see Figure 1-2 on page 1-4).
1-3
Installation