D-Link DGS-1210-10P Reference Manual page 73

5 Configuration
The steps of adding an access profile are described below:
1) After selecting the Profile ID and Frame Type (MAC, IPv4 or IPv6), specify attributes like
Untagged/Tagged (for MAC), ICMP/IGMP/TCP/UDP (for IPv4), or ICMP/TCP/UDP (for IPv6). Click Select
and a simplified frame diagram will be displayed.
The Add ACL Profile Page contains the following fields:
Parameter
Profile ID
Figure 5.86 – Add Access Profile
Figure 5.87 – Add Access Profile
Description
Select an unique identifier number for this profile set. This value is from 2
to 50.
68
D-Link Web Smart Switch User Manual