D-Link DGS-1210-10P Reference Manual page 74

5 Configuration
Frame Type
MAC ACL
IPv4 ACL
IPv6 ACL
To define the MAC ACL profile: Select MAC ACL with Tagged and click Select button. The updates to
show the follows:
Select frame type based on MAC address, IPv4 address, IPv6 address or
packet content. This will change the window according to the
requirements for the type of profile.
Select MAC ACL to instruct the Switch to examine the layer 2 part of each
packet header.
Select IPv4 ACL to instruct the Switch to examine the IPv4 address in
each frame's header.
Select IPv6 ACL to instruct the Switch to examine the IPv6 address in
each frame's header.
Select Packet Content to instruct the Switch to examine the packet
content in each frame's header.
Defines the ACL profile Layer 2 protocols. The possible values are:
Tagged - Defines the profile Layer 2 to match 802.1Q fields in the
Layer 2 header.
Untagged - Defines the profile Layer 2 to check the Layer 2 header
without the 802.1Q fields.
Defines the IPv4 ACL profile protocols. The possible fields are:
ICMP - Specifies ICMP as the Layer 4 protocol that the access profile
checks.
IGMP - Specifies IGMP as the Layer 4 protocol that the access profile
checks.
TCP - Specifies TCP as the Layer 4 protocol that the access profile
checks.
UDP - Specifies UDP as the Layer 4 protocol that the access profile
checks.
Defines the IPv6 ACL profile protocols. The possible fields are:
ICMP — Specifies ICMP as the Layer 3 IPv6 protocol that the access
profile checks.
TCP — Specifies TCP as the Layer 3 IPv6 protocol that the access
profile checks.
UDP — Specifies UDP as the Layer 3 IPv6 protocol that the access
profile checks.
6 9
6 9
D-Link Web Smart Switch User Manual