D-Link DGS-1210-10P Reference Manual page 21

4 SmartConsole Utility
D-Link Web Smart Switch User Manual
Figure 4.7 – SmartConsole Device Settings
Password Setting
Select a switch from the Device List. Click on this icon to launch the Password Setting window. Here you can
enter a new password and confirm it.
Figure 4.8 – SmartConsole Password Setting
Firmware Upgrade
Select one or many switches of the same model name from the Device List. Click on this icon to launch the
Firmware Upgrade window. Specify the Firmware Path (or Browse for one) that you are going to use. Input
the correct password of the device, and then click Upgrade. The state will show "OK" after completion, or
"Fail" if the firmware upgrade fails or cannot be completed for any reason.
16