Call Back (Station); Camp-On (Call Waiting Method) - NEC DT300 Series User Manual

Call Back (Station)

Lift handset or press Speaker.
Dial desired station number and receive busy tone or
ring back tone.
Press Call Back or dial 2 and receive service set
tone.
Restore handset.
When busy station becomes idle or the station that
did not answer initiates or answers a call or accesses
a feature and then becomes idle, the setting station is
alerted by ring and flashing LED.
To Answer A Camped-On Call
While engaged in a call, receive the camp-on
indication (one short tone burst). Answer LED
flashes.
Outside Line
Type
CMP WATS
4:26 PM TUE 12 FEB 2008
Press Answer key. Call in progress is placed on hold.
Connection to camped-on call is established.
Press Answer key to return to original call. Camped-
on call is placed on hold.
Repeated depression of the Answer key allows you
to alternate between calls. Display indicates
connected station or trunk at any given time.
Outside Line
Number
3
To Set Camp-On (Transfer Method)
With call in progress, ask party to hold. Depress
Transfer button, feature dial tone is heard.
Dial desired station number and receive busy tone.
Dial 4 and receive service set tone. Camp-on tone (2
tone bursts) is sent to busy station.
Restore handset.

Camp-On (Call Waiting Method)

Example: Station 2000 is in conversation with 2008.
Station 2001 dials 2000, receives busy. Station 2001 can
notify station 2000 that call is waiting.
To Activate Call Waiting
(Station 2001)
Station 2001 press Speaker. Receive dial tone.
Dial 2000 and receive busy.
BUSY
4:26 PM TUE 12 FEB 2008
Press Transfer key receive feature dial tone.
Dial Camp-on (call waiting) access code.
36
Called station
Number
2000