NEC DT730 Quick User Manual

DT730
Quick User Guide
for DT730 phones controlled by
SIP@Net
For detailed information please consult
the comprehensive User Guide available
at : www.nec‐unified.com.
© NEC Unified Solutions 2010
All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner.
All brand names and product names in this document are trademarks
or registered trademarks of their respective companies.
Issue : May 2010
PLACING CALLS
The icon in the display indicates that the terminal
is currently not registered with any SIP Servers.
You can not make any calls.
The icon indicates that the terminal is
successfully registered with the SIP@Net Server.
You can make calls as follows :
1. Lift the handset, press the Speaker key, or select
the New Call soft key, or press the programmable
Line key to receive dial tone.
2. Enter the telephone number of the required
party.
3. Press the Dial soft key to initiate the call, or wait
a few seconds for the call to be automatically
dialed.
4. When the dialed party answers, use the headset
or MIC to start the conversation.
USING PHONE FEATURE KEYS
1. Hold – Places current call on hold.
To resume the held call, press the Hold key, or
select the Resume soft key.
On hold duration is displayed in HH:MM:SS
During a held call, you can dial another party by
selecting the New Call soft key, which provides
dial tone.
2. Transfer – Initiates/completes a transfer.
3. Speaker – Full‐duplex speaker phone capability.
4. Recall – Refer to Hold.
5. Feature – This key displays a set of menu options
that provide additional capabilities.
DT730 Quick User Guide
(ITL‐24D shown)
16
6. Answer – When the LED (16) is ON, press the key
to answer a waiting call.
7. Mic – Press this key to mute the microphone :
the LED is flashing. Press the key again to un‐
mute the microphone.
8. Menu – Accesses user settings and information
local to the phone.
9. Cursor Key – Use this key to access various
features with simple operation.
1