Authorization Code; Account Code; Forced Account Code - NEC DT300 Series User Manual

Account Code

To Enter
Lift handset or press Speaker key, receive dial tone.
Enter feature access code, receive service set tone.
Enter Account Code (up to 16 digits).
Receive dial tone and dial desired number.
To Enter Account Code After Authorization Code:
Lift handset or press Speaker key, receive dial tone.
Enter feature access code for Authorization Code,
receive service set tone.
Enter Authorization Code, receive second service set
tone.
Enter Account Code, receive dial tone, and dial
desired number.

Forced Account Code

Lift handset or press Speaker key, receive dial tone.
Enter feature access code, receive service set tone.
Enter Forced Account Code (up to 16 digits), receive
.
dial tone

Authorization Code

To Enter Without Account Code:
Lift handset or press Speaker key, receive dial tone.
Enter feature access code, receive service set tone.
Enter Authorization Code (up to 16 digits).
Receive dial tone, dial desired number.
Voice First/Tone First
Allows incoming station calls to your Dterm to either ring
or go to voice announcement.
Press Speaker key. Receive dial tone.
Dial Voice/Tone access code, LED display shows
current mode receives feature dial tone.
4:26 PM TUE 12 FEB
Press *, LED display shows mode change, receive
feature set tone.
4:26 PM TUE 12 FEB
NOTE: Each time * is pressed, you alternate between
TONE and VOICE.
30
VOICE
2008
TONE
2008