NEC DT300 Series User Manual page 13

(5) Soft Keys
Any feature shown at the bottom of the LCD is available. The
appropriate feature key is displayed on the screen according to
the call handling process.
(6) Help
Explanations of the Soft Keys can be called up on the LCD by
pressing this key.
(7) 8LD Display
32 (8 keys x 4 pages) additional programmable keys are
provided. They can be programmed as Flexible
Line/Programmable feature key by Telephony Server
Administrator, similar to existing programmable keys. When
Telephony Server Administrator sets "One-Touch Speed
Dial key" on the programmable keys, users can assign any
numbers (ex. Telephone number, etc.) to the key (up to 8
digits).
* Maximum 8 characters can be displayed.
** The users can change the name displayed on the LCD. For
the operating procedure, refer to To Register Name On One-
Touch Speed Dial key.
*** For the assignment of the keys, confirm to the Telephony
Server Administrator.
(a) Icon
Status of the Line key such as Call termination, Call Hold or
Busy, and setting on the Feature key are shown as Icons.
User's Status
Idle
Call Hold (Individual Hold on Call
Park Group)
Exclusive Call Hol
Recall (Individual Hold/Exclusive
Call Hold/Call Transfer/
Individual Hold on Call Park Group)
During Conversation (Individual
Use)
Call Transfer
Conference
11
Flashing
Icon
Pattern
Blink
Note
Blink
Note