Terminal Setup - NEC DT300 Series User Manual

2.

TERMINAL SETUP

This chapter describes operating procedures for
terminal settings by the UP/Down Key and Feature
Keys.
Various terminal settings such as display, sounds,
password, and language are also available from Menu
Key. For detailed information on terminal settings from
Menu Key, see SV7000 IP Peripheral Guide.
Terminal Setup with the Up/Down Key
To Adjust Handset Receiver Volume
Press the Up/Down key in the off-hook status or during
the call.
To Adjust Speaker Volume
Press the Up/Down key during speakerphone operation
or during the call.
To Adjust Ringer Tone
Press the Up/Down key during ringing.
To Adjust LCD Contrast
Press the Up/Down key in the on-hook status.
Note: When the terminal is connected with 16LD ADM, 16 degrees
of LCD contrast are available (8 degrees in terminal side and 2
degrees in ADM itself). (In Expansion mode only, Link motion)
18