Conference; To Establish A Broker Call; Call Back (Station) - NEC NEAX7400 ICS M110e User Manual

CONFERENCE

With call in progress, ask party to hold.
Press Transfer, receive interrupted dial tone.
Dial desired number.
After call is answered, press Conf, Conf LED lights.
Three-way conference is established.
If one party hangs up, other two remain connected. Conf LED goes out.

TO ESTABLISH A BROKER CALL

While engaged in a call and wishing to consult a third party, press
Transfer. Caller is automatically placed on hold.
Dial desired party to consult.
Press Transfer to return to original caller. Third party is automatically
placed on hold.
Repeated depression of the Transfer button allows you to alternate
between calls.
NOTE: The display indicates connected station or outside line at any given time.

CALL BACK (STATION)

Lift handset or press Speaker.
Dial desired station number and receive busy tone or ring back tone.
Press Call Back or dial 2 and receive service set tone.
Restore handset.
When busy station becomes idle or the station that did not answer
initiates or answers a call or accesses a feature and then becomes idle,
the setting station is alerted by ring and flashing LED.
CONF 2000
(Time Display)
15
2001