Table of Contents
Advertisement
1.6 Tones
In addition to ringing, you may hear the following tones:
· Page Call: Single Loud Beep
This tone indicates that your phone is receiving a
and you cannot be heard by the person doing the page.
· Short Code Confirmation: 2 Loud Beeps
These tones are heard when using
completed.
· Direct Voice Call: 3 Loud Beeps
These tones are heard when receive a direct call which has been automatically answered by the phone. You can
hear the caller and then can hear you.
· Waiting: 4 Loud Beeps
These tones are heard if the phone has been waiting for you to complete dialing or the number you have dialed is
invalid. The tones are repeated until you hang up.
· Incompatible: Warble tone
This continuous high-low tone is heard if the number dialed is not valid for routing by the telephone system or any
system function. .
You may hear the following tones during calls:
· Conference Tones: Single Tone/Double Tone
During a call, a single tone indicates that someone else has joined the call. A double tone indicates that someone
has left the conference. The system administrator can replace these with a repeating single tone every 10 seconds.
· Held Tone: Double tone every 4 seconds.
If the system does not have music on hold configured, this repeated double tone is used to inform you that your
call has been put on hold by the other system user.
T7000 Special Tones
As the T7000 does not have a display, it uses a number of additional tones that are heard when using the Feature
button.
· Confirmation Tone: A high pitch single beep.
This tone indicates that the requestion action has been performed. (e.g., Feature button pressed invoking feature
session).
· Waiting for Input Tone: A low pitch single beep.
This tone indicates that the phone is waiting for you to enter some data or press a button.
· Error Tone: A high-low double beep.
This tone indicates that the process has failed, timed-out or is not supported by the T7000 phone.
T7000 Telephone User Guide
IP Office
page call
18
short codes
. It is a confirmation that the short code function has been
10
. You do not need to take any action to hear the call
Page 12
- Issue 02a (03 October 2011)
Advertisement
Table of Contents
