Thermal Solutions EVS SERIES Installation, Operating And Service Instructions page 79

C. SECURITY MENU
1. Press and hold the MENU button to enter menu mode.
2. Access parameters and set password.
a. In MENU mode page through to the SECURITY menu and press ENTER.
b. Page down to the "Enter Password" parameter and press ENTER.
c. Use the arrow buttons to change the password value to the desired password and hold ENTER until the screen flashes.
3. The access level will reset to Basic after one hour if no key is pressed, or if power is removed.
Access Level Enter Password
Basic
Supervisor
Factory
Consult Thermal Solutions Boiler Control (TSBC) Instruction manual for operation guidance and a detailed list of parameters
and their associated access levels.
Description
This is the default access level. The user can view many parameters, but is only
0 (NONE)
allowed to edit a small sub-set of the parameters that are visible.
This password is set at the factory but can be changed in the field. The user can
15 view and edit most parameters that are visible. Note: Not all parameters will be vis-
ible at the Supervisor Access Level.
All relevant internal parameters in the system will be visible and programmable.
Please consult Thermal Solutions for the factory access level password.
79