Operation Condition Setting (Se) - Omron V670-H11 User Manual

5-8 Controller Control Command

5-8-5 Operation Condition Setting (SE)

Specifies operating conditions in the Self-Execution mode.
<Command>
(1) Process command
Process code
Command
code
"SE"
(2) OUT1 output
Condition (A) Comparison parameter*
Output parameter
(3) OUT2 output
Condition (A) Comparison parameter*
Output parameter
(4) RS-232C output
Condition (A) Comparison parameter*
Output parameter
* There are the following three patterns in the comparison parameter section.
The condition is regarded as ER (Communication NG) in the communication judgment:
Error code
The condition is regarded as anything other than ER in the communication judgment:
No parameter
The condition is data judgment:
Data offset Number of bytes
of data
5-20
Example of execution command
Opera- Condition (B)
tor
Opera- Condition (B)
tor
Opera- Condition (B)
tor
Comparison data
to
Comparison parameter*
Comparison parameter*
Comparison parameter*