5-6 Communication Command
Communication commands to communicate with a tag are described here in this section. The commands are described assuming that
1:1 protocol is used. If 1:N protocol is used, follow the 1:N protocol format. (For details of protocol format, refer to "5-2 Command
Response Format".)
Example of sent data
Command code
1:1 Protocol
Example of received data
Command code
Example of sent data
1:N Protocol
Example of received data
Data
Retransmis-
Status
Termination code
sion flag
flag
Node No.
Command code
Node No.
Command code
Termination code
Terminator
Data
Data
Terminator
Retransmis-
Status
sion flag
flag
Data
Terminator
Terminator
5-9