Connecting Cable - Omron V670-H11 User Manual

7-3 Connection of Programming Console

7-3-2 Connecting Cable

Connect the programming console with the dedicated cable model V700-P10. A round connector and square connector come with the
cable. Use the round connector and square connector to the controller, and the programming console respectively.
A connector always can be plugged into and unplugged from the programming console when the power supply turns on.
(1) Remove the connector cover at top of the reverse side or at the
reverse side. Keep the removed panel as shown in the figure.
(2) Insert the square connector of the connecting cable completely
until a lock lever clicks to fix it.
(3) Open a cover at the front panel of the controller.
(4) The round connector of the connecting cable is marked with an
arrow. Insert the connector with the arrow up into the program-
ming console connector of the controller completely. This connec-
tor is not equipped with a lock.
When you plug or unplug the connector into the programming console when the power supply
turns on, take care not to touch the controller wire. Otherwise, you may get an electric shock.
7-4
Caution