Omron V670-H11 User Manual page 65

<Example of usage>
When data is read out of the tag into which destination information has been written, the applicable destination only is detected and the
pulse is output, and reading could not be done due to any trouble, an error pulse is output as shown below.
Error output
Antenna
Fast movement
• Setting and operation flow
Setting of operating conditions
Item Description
Execution process Communication command: RD
Communication mode: RI
OUT1 Outputs OUT1 in tms at data
matched.
OUT2 Outputs OUT2 at abnormal end.
RS-232C Nil
Trigger input (IN)
Coincidence output(OUT1)
Abnormal output (OUT2)
Coincidence
output
Trigger input
(Synchronization sensor)
Tag
Communication process
Data matched
Coincidence
Error output
output
Trigger input
(Synchronization sensor)
Power ON
TRIG input
Data read (E)
Correct end
Data matched(D)
Coincidence
output pulse
Communication process Communication process
Data unmatched
4-3 Operation Mode
Abnormal output
pulse
Data matched
4-7