Chapter 3 Setting And Installation; Controller; Switch Setting; How To Open Cover - Omron V670-H11 User Manual

Chapter 3 Setting and Installation

3-1 Controller

3-1-1 Switch Setting

To set the switches, open a cover at the upper left part of the unit.

3-1-1-1 How to Open Cover

To open the cover, insert a screwdriver, which comes with the controller, into a notch at the left end of the cover.
When the cover opens, you can see the two node number setup switches (SW1 and SW2), two dip switches (SW3 and SW4) and con-
necting port for programming console.
Node number setup switch
Dip switch
Connecting port for programming
console
3-1