Registering A Unit - Panasonic KX-TG6561E Operating Instructions Manual

TG6561E(e).book Page 29 Tuesday, July 13, 2010 1:50 PM
Important:
L You must store the phone number
with an area code in the call barred
list.
■ From the caller list:
1
{<} (y)
2
{V}/{^}: Select the entry to be
barred. i I
3
{V}/{^}: "Caller Barred" i
M
4
{V}/{^}: "Yes" i M i
{ic}
■ By entering phone numbers:
1
8 i {#}{2}{1}{7} i m
2
Enter the phone number (24
digits max.). i M
L To erase a digit, press ^.
3
{ic}
Viewing/editing/erasing bar call
numbers
1
8 i {#}{2}{1}{7}
2
{V}/{^}: Select the desired entry.
L To exit, press {ic}.
3
To edit a number:
~ i Edit the phone number.
i M i {ic}
To erase a number:
W i {V}/{^}: "Yes" i M
i {ic}
Note:
L When editing, press the desired dial
key to add, ^ to erase.
Changing the base unit PIN
(Personal Identification
Number)
Important:
L If you change the PIN, please make
note of your new PIN. The unit will not
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Programming
reveal the PIN to you. If you forget
your PIN, see page 46.
1
8 i {#}{1}{3}{2}
2
Enter the current 4-digit base unit
PIN (default: "0000").
3
Enter the new 4-digit base unit PIN.
i M i {ic}

Registering a unit

Operating additional units
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L The additional handset model
recommended for use with this unit is
noted on page 4. If another handset
model is used, certain operations
(handset settings, base unit settings,
etc.) may not be available.
Registering a handset to the
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base unit
(for example, _ is displayed even when
the handset is near the base unit), re-
register the handset.
1
Handset:
8 i {#}{1}{3}{0}
2
Base unit:
Press and hold {x} for about 5
seconds, until the registration tone
sounds.
L If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
29