Panasonic AJ-SPX800P Operating Instructions Manual page 51

Information Item
PRO14 - AC_ADPT
Battery type
. V
Battery remaining
%
level/voltage
EMP
MAX
REC
Camera-recorder
REC indication
min
P2 card remaining
free space
END
WP
LOOP
INFO P2
/
2 card remaining
free space (when
MODE CHECK is
being performed)
DZ
D.ZOOM
S
Super iris ON/super
B
black ON
SB
. K
Color temperature
1/
Shutter speed/mode
1/100 - 1/2000
SUPER V
Indication
Battery type, selected through a menu option. When the AC adapter is connected,
it is indicated as AC_ADPT.
Battery remaining level in tenths of a volt
Digital battery remaining level, as a percentage
Digital battery empty.
Digital battery fully charged.
When the AJ-SPX800P is used as a system camera using a 26-pin extender or
Triax, the recording status of the camera-recorder is displayed using characters.
The indication stays illuminated during recording. This is displayed when the menu
option REC TALLY of the SYSTEM MODE is set to "CHAR".
This can also be displayed during the recording using the AJ-SPX800P alone.
This is displayed when the menu option REC STATUS of the VF INDICATOR2 is
set to "ON".
The indication "
the remaining level is near zero.
When the card space is used up, "END" comes on.
The P2 card is write-protected.
The camera-recorder is in LOOP REC mode. When loop recording cannot be
performed, for example because the P2 card has no free space, the indication
blinks.
P2 card being recognised.
Total free space/capacities of the P2 cards (when MODE CHECK is being
performed).
<Note>
When the menu option P2 CARD REMAIN is set to "ONE CARD", the number of
the P2 card slot that contains the target card is indicated, together with the
remaining space.
For more information, see [P2 Card Remaining Free Space/capacity Indication]
(page 52).
min The number of the P2 card slot that contains the target card and the remaining free
space (when MODE CHECK is being performed) are indicated. In LOOP REC
mode, the minimum guaranteed recording time is indicated. This indication also
appears when the target P2 card has been switched with a user button.
The minimum guaranteed recording time refers to the sum, at the time loop
recording is stopped, of the remaining free space of available P2 cards, except for
the card with the largest remaining free space.
Example: If three P2 cards are available, with remaining space of eight minutes,
Camera-recorder in digital zoom mode. Note that the indication blinks while the
camera-recorder is in FOCUS mode.
Super iris ON.
Super black ON.
Super iris and super black both ON.
Color temperature assigned to A, B, and PRE of the WHITE BAL switch (this is a
value stored at AWB performance or a value set through the menu option). The
indication is not provided in ATW mode.
. Shutter speed set to SYNCHRO SCAN.
Shutter speed fixed.
Shutter speed set to SUPER V (high vertical resolution mode).
Status
min" stays illuminated under normal conditions or blinks when
five minutes and two minutes respectively, then the minimum
guaranteed recording time is seven minutes.
4
51