Menu Operation Section - Panasonic AJ-SPX800P Operating Instructions Manual

VIDEO OUT (video signal output) connector
This connector outputs video signals. The video signals
linked to the setting of the OUTPUT SEL switch are output
from here.
OPTION SLOT
Attach the video encoder card (AJ-YAX800G, optional). For
information about the installation and proxy recording, see
the AJ-YAX800G instruction manual.
SD memory card insertion slot
An SD memory card (optional accessory) is inserted here. It
is used for metadata upload and proxy recording (optional).
<Cautions in using SD memory cards>
SD memory cards used with the AJ-SPX800P should
conform to SD standards. Be sure to format cards using the
AJ-SPX800P. Cards formatted according to SD standards
using PCs or other devices can be used.
SD memory cards with the following capacity (8MB - 1GB)
can be used for the AJ-SPX800P:
8 MB 16 MB
128 MB 256 MB
For proxy recording (optional), 256MB, 512MB or 1GB SD
memory cards with "High Speed" indication should be used.
For the latest information, see the following support site.
https://eww.pavc.panasonic.co.jp/pro-av/
BUSY (operation mode display) lamp
This lamp indicates the active status of the SD memory
card.
It stays illuminated when the card is active.
<Note>
While the lamp is on, do not insert or remove the card.
32 MB 64 MB
512 MB 1 GB

2-5 Menu Operation Section

MENU button
Used to turn on/off the menu.
JOG dial button
With the menu open, this button is used to navigate through
menu pages, select options and specify values.
For directions on manipulating the menu, see [4-6 Menu
Displays in the Viewfinder Screen].
SD memory card insertion slot
An SD memory card (optional accessory) is inserted here.
This slot is used for writing/saving menu data.
BUSY (operation mode display) lamp
This lamp indicates the active status of the SD memory
card.
It stays illuminated when the card is active.
<Note>
While the lamp is on, do not insert or remove the card.
2
17