System Setting; System Mode - Panasonic AJ-SPX800P Operating Instructions Manual

8-2 SYSTEM SETTING

8-2-1 SYSTEM MODE

Items/ Adjustable
Data Saved Range
REC SIGNAL CAM Select video input signals.
CAM Record the signal from the camera
VIDEO
VIDEO: Record the signal from the
1394
1394: Record the signal from the 1394
<Notes>
After the power has been turned OFF, this
setting defaults to CAM when the power is
turned ON again.
With VIDEO selected, to synchronise this
camera-recorder to the video signal (VBS)
that is input to the GENLOCK IN terminal,
the GENLOCK item in [8-2-7 GENLOCK]
must be set to EXT.
– C U F E
CAMERA 60i Switch the operating mode of the camera.
60i:
MODE 30P
30P:
24P
24P:
24PA
24PA: Camera operates in 24PA mode
S C U F E
V.RES (24/30P) INTRLCE Set the vertical resolution when the 24P,
24PA, 30P mode is selected.
PROG.
INTRLCE: Lines are mixed. Natural images
PROG. : Lines are not mixed. Complete
<Note>
When PROG. is selected, images are
recorded as progressive segmented frame
images, which enables complete
progressive editing. However, adding
Vertical Detail (V.DTL) produces unnatural
images. Therefore, we recommend using
the camera with V.DTL set to 0. (Sufficient
vertical response is maintained in the
images after the progressive editing even
when V.DTL is set to 0.)
S C U F E
ASPECT 16:9 Select the aspect ratio for recording.
16:9: Record in <16:9> aspect ratio.
4:3
4:3:
– C U F E
REC MODE 50M Select the recording mode.
50M: Record in DVCPRO50 format.
25M
25M: Record in DVCPRO format.
DV
DV:
– C U F E
SET UP 0% Switch the setup. (When the DVCPRO50 or
DVCPRO format is selected.)
7.5%A
0%:
7.5%A: Setup is switched to 7.5% for the
– C U F E
Remarks
GENLOCK IN terminal
input terminal (when optional AJ-
YAD800G is attached)
Camera operates in 60i mode.
Camera operates in 30P mode.
Camera operates in 24P mode (2:3)
(2:3:3:2)
can be obtained.
progressive images can be
obtained when images are edited
after shooting.
Record in <4:3> aspect ratio.
Record in DV format.
Setup is switched to 0% for both the
camera output and the recording.
camera output and 0% for the
recording.
Items/ Adjustable
Data Saved Range
REC TALLY RED Selects display of the recording status of the
camera when the AJ-SPX800P is used with
GREEN
a 26-pin extender or Triax, or when it is
CHAR
controlling an external VTR, by setting the
menu option 26PIN CONTROL to "BOTH".
The menu option 26PIN CONTROL is found
in the OPTION MODE 2 screen on the
SYSTEM setting page.
RED: The red tally lamp lights up.
GREEN:The green tally lamp lights up.
CHAR: The VF displays [REC] in characters.
– C U F E
ACCESS LED ON Select whether or not to enable illumination
of the P2 card access LEDs.
OFF
ON:
OFF: LEDs remain off.
– C U F E
USB ON Select the USB drive mode when using the
P2 card as bulk storage by connecting the
OFF
AJ-SPX800P with a PC via USB2.0.
ON:
OFF: Stops the USB drive mode, and
<Note>
After the power is turned off, this setting
defaults to "OFF" when the power is next
turned on.
– – U F –
The ____ in the Adjustable Range column indicates the preset
mode.
Remarks
Enable the P2 card access LEDs to
light up for card status indications.
Switches to the USB drive mode.
Recording, playback or thumbnail
operation via the AJ-SPX800P is not
permitted.
returns to normal operation.
8
99