Preparing For Audio Input; When Using The Front Microphone; When Using A Wireless Receiver - Panasonic AJ-SPX800P Operating Instructions Manual

5-4 Preparing for Audio Input

Take the following steps to prepare the camera for connecting
audio input devices.

5-4-1 When Using the Front Microphone

The AJ-MC700P microphone
microphone that can be mounted on the camera.
1
Open the microphone holder.
2
Mount the microphone and tighten the clamping screw.
Clamping Screw
3
Connect the microphone cable to the MIC IN jack on the
camera.
MIC IN Jack
4
Set the AUDIO IN switch to [FRONT] depending on the
audio channel to be recorded.
74
kit (optional) includes
AUDIO IN
Switch

5-4-2 When Using a Wireless Receiver

Using an External Wireless Receiver
Mount a wireless receiver when using a wireless system.
1
Mount the wireless receiver on the camera attachment.
2
a
Align the grooves in the camera attachment with the pins on
the unit (e.g., the battery case), and mount the wireless
receiver.
Wireless Receiver
AUDIO IN Switch
3
Connect the wireless receiver to the AUDIO IN jack with the
XLR cable.
4
Set the AUDIO IN switch to [REAR] for the channel to which
the XLR cable is connected.
5
Set the LINE/MIC/+48V selector switch on the rear panel to
[MIC].
To remove the wireless receiver, raise the lever on the
bottom of the camera attachment.
<Note>
Please refer to the wireless receiver's instruction manual for
such information as operation of the wireless receiver.
Audio Output Jack
Camera Attachment
XLR Cable
AUDIO IN Jack