Ampro Little Board 700 Reference Manual page 79

Chapter 4
♦
Assign DMA 5 – [Disabled] or [Enabled]
• If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
•
If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
♦
Assign DMA 6 – [Disabled] or [Enabled]
•
If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
•
If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
♦
Assign DMA 7 – [Disabled] or [Enabled]
•
If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
•
If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
LittleBoard 700 Reference Manual
BIOS Setup
73