Appendix C. –The Icons In The Analog Video Osd - American Dynamics illustra 400 Installation & Operation Manual

APPENDIX C. –The Icons in the Analog Video OSD
This chapter lists all icons displayed in the OSD and explains what their meanings are when they
are shown.
This icon means the IP address of the device is retrieved by a DHCP server instead
of a static address.
This icon indicates that the network is activated by an HTTP or FTP connection.
This icon shows that the network connection is lost.
This icon means that the device has received a configuration setup, but the data has
not been flushed into the memory.
This icon means that the device is flushing all configurations into the memory.
This icon shows that the device is in the alarm duration mode.
This icon shows there is a motion alarm triggered by the motion detection mode.
This icon indicates that an SD-Card inserted into the device is working properly.
This icon means that an SMTP session is activating.
This icon means that an FTP session is activating.
This icon means that an FTP session is activating.
This icons means that a PPPoE session is active or the data associated with the
RS-485 is active.
This icon means there is luminance detection.
106 Installation and Operation Guide