1. Part Names 4 5 6 1. Plug Inlet: A DC 12V inlet that connects to an external power supply. 2. Plug Inlet: An AC 24V inlet that connects to an external power supply. 3. ETHERNET 10/100 Connector: This is a standard RJ-45 connector for 10/100 Mbps Ethernet networks. PoE (Power over Ethernet) function: Provides power to the device via the same cable as used for the network connection.
Quick Setup Guide 2. The Reset Button You can use the Reset button to return to default, or factory, settings. Press the Reset Button for about 10 seconds. Blue screens will be displayed, and a text saying “RESETTING…” will appear. The device auto reboots.
Page 6
3. Install, configure and set the IP Dome Camera The IP Indoor Mini-dome software default setting is DHCP OFF. Users can build the IP Indoor Mini-dome working environment with a static IP address. The default static IP is 192.168.1.168. You can set an IP address for the IP Indoor Mini-dome if the LAN unit isn’t connected to a DHCP server.
Page 7
Quick Setup Guide Step 7: Click "Exit" at the bottom of the "USB Configuration” window to close the window. Alternatively you can click the "Launch" button to see the local camera images immediately. However, you must check your PC’s IP address and link to your camera with the network connector (RJ-45) before doing so. Step 8: If you can see the images, then the IP setting is complete.