Figure 5.15 Audio In/Out; Figure 5.16 - American Dynamics illustra 400 Installation & Operation Manual

Installation and Operation Guide
NOTE:
In order to use the Audio In/Out signal function, please follow the steps given below.
1. Connect to the camera webpage over the PC IE Browser.
Ensure "Audio Mechanism Setting" & "Enable audio out" are both selected. Click Submit.
2.
3. Connect the Mic to the PC, and connect the camera Audio out to the speaker.
Select "Talk"
4.
5. Confirm the sounds made in the camera-connected speaker.
6. Connect the Mic to the camera--Audio in; connect the speaker to the PC--AUDIO Out.
Click "Listen" in the webpage
7.
8. Confirm the sounds from the PC speaker.

Figure 5.15 Audio In/Out

Figure 5.16


; speak to the PC-connected microphone.

; the Mic sends audio signals to the camera.
51