Connection Testing; Figure 4.10 Select Command Prompt - American Dynamics illustra 400 Installation & Operation Manual

Installation and Operation Guide

4.6 Connection Testing

With the previous settings, follow the instructions below to ensure whether you have established
the connection successfully.
1. Click Start > All Programs > Command Prompt.
Enter ping XXX.XXX.XXX.XXX (the camera's IP address), then enter. (See the sample screen
2.
below).
** This is the IP address for an IP camera that is assigned for the connected IP camera.

Figure 4.10 Select Command Prompt

Figure 4.11 Command Prompt
37