Figure 4.9 Tcp/Ip Configuration Setting; Tcp/Ip Configuration Setting - American Dynamics illustra 400 Installation & Operation Manual

4.5 TCP/IP configuration setting

Click Start > Control Panel > Network Connections.
Select Internet Protocol (TCP/IP), and then click Properties.
Before processing the IP camera installation in a WAN, please make sure the Internet connection
works properly. If not, please contact your ISP provider.
→

Figure 4.9 TCP/IP configuration setting

If you are using a DHCP server, please select Obtain an IP address automatically. Any assigned
IP address for the connected IP cameras must be in the same class type as the server. If there is no
DHCP server, please select specify an IP address enter the IP address, subnet mask and default
gateway of your choosing of your PC. This IP address must be different from other network IP
devices but in the same class type.
NOTE: The IP address of an IP camera in a network must be unique to itself as opposed to
those of the other chosen PCs, but in the same class type.
36 Installation and Operation Guide