Setup; Installation And Operation Guide; Figure 5.6 Setup Wizard; Figure 5.7 Setup Lan Settings - American Dynamics illustra 400 Installation & Operation Manual

5.1.3 Setup

Click on the Setup button on the home page to proceed to the advanced settings.
5.1.3.1 Wizard
To quickly configure your IP Camera, click Wizard on the top of the Setup pages.
This wizard will guide you through a step-by-step process to configure your new camera and connect
the camera to the Internet.

Figure 5.6 Setup Wizard

Click Next to continue.
Step 1:

Figure 5.7 Setup LAN Settings

The IP Box Camera default setting is DHCP OFF. Users can build the IP Box Camera working
environment with a static IP address. The default static IP is 192.168.1.168. You can set an IP
address for the IP Box Camera if the LAN unit isn't connected to a DHCP server. Or turn on the DHCP
setting to use the DHCP protocol if the DHCP server is working in the LAN. The IP Box Camera will
obtain an IP address automatically from the DHCP server.
If your Internet Service Provider has provided you with connection settings, or you wish to set a static
address within your home network, enter the accurate information for your static IP setting.
Click Next to continue.
44

Installation and Operation Guide