Figure 5.22 Dynamic Dns - American Dynamics illustra 400 Installation & Operation Manual

 Change the Network Setting — DDNS.
The DDNS (Dynamic Domain Name Server) will hold a DNS host name and synchronize the public IP
address of the modem when it has been modified. The user name and password are required when
using the DDNS service. The "Network" page has, on its upper left, the "DDNS" icon. Please follow the
steps below to change the DDNS setting through the network as necessary.
Click on the Dynamic DNS button on the upper left menu to enter the "Dynamic DNS" page.
1.
Click "Enable DDNS" to checkmark the box and activate the function.
2.
Fill in your dynamic "Server Address", "Host Name", "User Name", "Password", "Verify Password",
3.
"Timeout", "IP Address" and "Email Address".
4. Click on the Submit button to submit the new setting.
NOTE: Please refer to section 5.1.3.8 (PPPoE & DDNS) for more details.
Description of function keys:
Enable DDNS Function:
DNS
Server Address:
Host Name:
User name:
Password:
Verify Password
Timeout:
Status:
58

Figure 5.22 Dynamic DNS

Checkmark to activate the function.
(The Domain Name System) is an Internet service that translates domain
names into IP addresses (i.e. 192.168.0.20). The address can be
obtained from your ISP or network gateway.
Select your Dynamic DNS provider from the pull down menu or enter the
server address manually.
Enter the host name of the DDNS server.
Enter your user name or e-mail used to connect to the DDNS
Enter your password used to connect to the DDNS server.
Enter your password again to connect to the DDNS server.
Enter the DNS Timeout values for registering the IP address.
Indicate the connection status, automatically determined by the system.
Installation and Operation Guide