Figure 5.36 Media - American Dynamics illustra 400 Installation & Operation Manual

Media:
Click on the Add button in the Media column to enter the "Media" setting page.
1. Enter the Media name, the unique name for media. There are three kinds of media: snapshot,
video clip and system log.
2. Set the details of the Snapshot.
"Source": Select the video source.
"Send Pre-event images": The number of pre-event images.
"Send Post-event images": The number of post-event images.
"File name prefix": The prefix name will be added on the file name of the snapshot images.
"Add date and time suffix to file name": Check it to add timing information as file name
suffix.
3. Set the details of the Video Clip.
"Source": Select the video source.
"Pre-event recording": The interval of pre-event recording in seconds. There are two
limitations for video clip file.
"Maximum duration": The maximum recording file duration in seconds.
"Maximum file size": The maximum file size would be generated.
4. Click on the System log to activate the function.
Click on "Submit" to save, or click on "Don't Submit" to go back to the Event main page.
5.
Media settings:
(1) Click Add under the Media column on Event Settings page to open the Media setting page.
On this page, you can specify the type of media that will be sent when a trigger is activated.
A total of 5 media settings can be configured.
(2) Enter the Media Name for the media setting.
(3) Select the Media Type. There are three choices of media types available: Snapshot, Video
78

Figure 5.36 Media

Installation and Operation Guide